Traffic Flow - Protobuf

Important notes:

• This TomTom Orbis API is in public preview.
• This API is powered by the TomTom Orbis Maps.
• See the TomTom Orbis Maps documentation for more information.

Purpose

The TomTom Traffic Flow - Intermediate Service - Protobuf (hereafter called 'Service') is designed for server-to-server integration with traffic control center, routing, navigation, and mapping applications. It contains real-time travel times and speeds for segments, based on TomTom's Traffic technology, with several possible configurations.

This document describes the data exchange method and the payload description of the Service interface.

Scope

This document gives basic information on the Service and shows how to configure it to work with your environment. The user is expected to have basic installation knowledge and experience using protocol buffers.

Intended audience

This document is intended to be used by TomTom partners and customers (decision makers and developers).

Features

TomTom offers traffic flow data to customers. A custom product is configured based upon your specific needs. The product is static, so included regions and features are fixed (once the product is configured), it contains standard configuration (see section Default enabled information) but it also provides customizable configuration options (see section Optionally activatable features).

Request data

The Service uses RESTful API (Representation State Transfer) technology. Since you only need to use one URL, the service is relatively uncomplicated to use. To make a request, the URL is constructed as shown in the following sections.

Important

To use this service, ensure that all prerequisites are met as described in the section A secure connection or at Authentication for client certificate access.

HTTPS Method: GET

For ease of viewing and identification:

• Constants and parameters enclosed in curly brackets { } must be replaced with their values.
• Please see the following Request parameters section with the required and optional parameters tables for their values.

The generic request format is as follows.

https://{baseURL}/tsq/hdf-detailed/{productName}/{apiKey}/content.proto[?flowType={flowType}]

The following is an example URL request:

https://cert-traffic.tomtom.com/tsq/hdf-detailed/DEU/{Your_API_Key}/content.proto

The following is an example cURL request:

curl -XGET 'https://cert-traffic.tomtom.com/tsq/hdf-detailed/DEU/{Your_API_Key}/content.proto'

Request parameters

The following table provides a detailed explanation of the available fields that were previously shown.

Request headers

Since flow feeds can be very large, TomTom recommends optimizing the information transmission as much as possible. Through optimization, the client receives more up-to-date information.

Response data

Response example

If you make the following request:

https://cert-traffic.tomtom.com/tsq/hdf-detailed/DEU/{Your_API_Key}/content.proto?flowType=nff

You can expect a response that contains protocol buffers binary data. The textual representation of this data could look like this:

1metaInformation {
2  createTimeUTCSeconds: 1452092910
3  supplierAndClientInfo {
4    clientID: "db14af1d-3827-4d61-8525-8f70bc1c5b3f15e87601"
5    supplierID: "TomTom Traffic Service"
6  }
7}
8[...]
9trafficFlow {
10  location {
11    openlr: "\013\t\223\332%UF\033`\013\001)\002$\033S~"
12  }
13  speed {
14    averageSpeedKmph: 5
15    travelTimeSeconds: 334
16    confidence: 97
17    relativeSpeed: 0.106
18    trafficCondition: STATIONARY_TRAFFIC
19  }
20}
21[...]

Response - Protobuf payload specification (analysis of the received output)

Protocol buffers is the de-facto standard for encoding and transmitting any structured information in a compact, platform-independent way. TomTom uses protocol buffers (version 2) format for the output payload. After defining the data structure an encoder and a decoder can be generated for integration into C++, Java and several other languages. Also see http://code.google.com/p/protobuf or https://protobuf.dev for more information.

Important: Protocol buffers schema

Our output type uses the proprietary TomTom protocol buffers message types. The data structure of the protocol buffers output is defined in the schema file ProtobufTrafficFlow_v11.proto. TomTom supports schema version 11 and above.

All fields are marked as optional, as recommended by Google, but the output always contains flow information (including a location).

The following table contains a brief description of the supported message types used in the data structure. More detailed information about the individual message fields can be found in the following sections: some fields are filled in by default, other fields require a specific feature to be enabled with the product.

Default enabled information

Meta information & supplier and client information

The MetaInformation message type provides data shared by all traffic flow messages. It contains:

• the creation time (TomTom uses the Epoch Linux Timestamp, which represents the number of seconds since January 1st, 1970 at UTC. For details, check https://www.unixtimestamp.com) and
• the supplier and client information in the SupplierAndClientInfo message.

1metaInformation {
2  createTimeUTCSeconds: 1696832700
3  supplierAndClientInfo {
4    clientID: "5b5977db-ab96-4599-b079-314a09cb9f204045d8f9"
5    supplierID: "TomTom Traffic Service"
6  }
7}

The SupplierAndClientInfo is crucial for accessing a flow feed using the recommended free-flow (ff) / non-free-flow (nff) update mechanism as explained in the section Request parameters under the optional URL parameter flowType. The same mechanism needs to be applied for requesting Identifier-based location referencing using OSM way IDs.

Speed message default information

The Speed message subsumes all speed and travel time related information. It consists of the following default information:

• averageSpeedKmph: The current average speed on the affected location in kilometers per hour.
• travelTimeSeconds: The current average travel time to pass the affected location or free-flow travel time if average speed is 0 km/h (in seconds).
• confidence: A measure of confidence values that rates the reliability of this speed estimate. The quality, amount, and age of live data for the affected location contribute to this score. It scales from 0 (no confidence) to 100 (fully confident about the estimate).

1trafficFlow {
Show hidden lines
6  speed {
7    averageSpeedKmph: 11
8    travelTimeSeconds: 144
9    confidence: 81
10  }
11}

Note that the same default information is provided in Speed messages for the flow message type TrafficFlowWithPredictionPerSection.

Location referencing

Geographical representation of the road segments is an important part of the payload. There are two geographical representations that are supported:

• by default OpenLR location referencing is used,
• optionally Identifier-based location referencing based on OSM way IDs can be provided.

OpenLR (see http://www.openlr.org) is a dynamic location referencing method that allows referencing of any road on the complete digital map. Because of its flexibility, it is possible to describe traffic events on high-level and lower-level road classes. The method is available free of charge. The service uses binary format version 3, as described in the OpenLR whitepaper. The whitepaper, software developer kit, and open source reference implementations are available for download from the OpenLR website. TomTom offers support for third parties to implement and test their own implementations.

1location {
2  openlr: "\v\254\320.!\367\n\033l\a\000Z\376\223\033\000"
3  lengthInMeters: 425
4}

Dynamic sectioning

Dynamic sectioning describes the flow segments in smaller sections when conditions vary considerably within a longer road stretch. The Service uses the message type SectionSpeed to report sections. They are ordered by their offset relative to the start of the affected location. This offset is indicated by the startOffsetInMeters field of a SectionSpeed message. A section ends when the subsequent section starts. The last section ends at the end of the affected location indicated by the lengthInMeters field in the Location message.

1trafficFlow {
2  location {
3    openlr: "\v\254\320.!\367\n\033l\a\000Z\376\223\033\000"
4    lengthInMeters: 425
5  }
6  speed {
7    averageSpeedKmph: 11
8    travelTimeSeconds: 144
9    confidence: 81
10  }
11  sectionSpeed {
12    startOffsetInMeters: 0
13    speed {
14      averageSpeedKmph: 2
15      travelTimeSeconds: 115
16      confidence: 81
17    }
18  }
19  sectionSpeed {
20    startOffsetInMeters: 48
21    speed {
22      averageSpeedKmph: 46
23      travelTimeSeconds: 29
24      confidence: 81
25    }
26  }
27}

Note that this feature is also available for the flow message type TrafficFlowWithPredictionPerSection.

Optionally activatable features

When the product is configured, there are some additional options that could be enabled or disabled depending on your specific preferences.

Identifier-based location referencing using OSM way IDs

Identifier-based location referencing OSM way IDs (hereafter called 'IDLR-OSM') is offered as an alternative method of location referencing besides OpenLR.

To get OSM way IDs from the feed, it must be requested with the URL parameter flowType=ff. How exactly this parameter is used is explained in the section Request parameters.

The following example shows a trafficFlow message with an IDLR-OSM in the segmentIds field indicated by type: OSM_WAY_ID that is composed of six OSM way IDs. All IDs use the forward direction, the first ID uses a start-offset, the second through fifth IDs have no offsets, and the sixth ID uses an end-offset. The affected location is the concatenation of all IDs minus the offset information.

1trafficFlow {
2  location {
3    openlr: "\v\211\302\310.P\211\033n\36418\324\253\033r\344\360I\324\036\033m\350>W\331\341\033l\3572Y\333t\033y\377\344"
4    lengthInMeters: 28533
5    segmentIds {
6      type: OSM_WAY_ID
7      segmentId {
8        id: 230910249
9        backwards: false
10        startOffsetInMeters: 3031
11      }
12      segmentId {
13        id: 631550315
14        backwards: false
15      }
16      segmentId {
17        id: 631550313
18        backwards: false
19      }
20      segmentId {
Show hidden lines
26        backwards: false
27      }
28      segmentId {
29        id: 406702547
30        backwards: false
31        endOffsetInMeters: 11317
32      }
33    }
34  }
35  speed {
36    averageSpeedKmph: 65
37    travelTimeSeconds: 1580
38    confidence: 100
39  }
40}

Flow prediction

Flow prediction uses the message type TrafficFlowWithPredictionPerSection. The current speed and predictive speeds for 15, 30, 45 minutes in the future are reported with sectioning if applicable.

1trafficFlowWithPredictionPerSection {
Show hidden lines
6  speedVector {
7    minutesInFuture: 0
8    sectionSpeed {
9      startOffsetInMeters: 0
10      speed {
11        averageSpeedKmph: 10
12        travelTimeSeconds: 238
13      }
14    }
15    sectionSpeed {
16      startOffsetInMeters: 673
17      speed {
18        averageSpeedKmph: 48
19        travelTimeSeconds: 63
20      }
21    }
22  }
23  speedVector {
24    minutesInFuture: 15
Show hidden lines
39  }
40  speedVector {
41    minutesInFuture: 30
Show hidden lines
56  }
57  speedVector {
58    minutesInFuture: 45
Show hidden lines
73  }
74}

Traffic condition

Provides a textual traffic condition indicator. When enabled, a categorization of current traffic condition is given. It can be any value out of seven values (see more details on FAQ about the definition of traffic conditions):

• FREE_TRAFFIC

• HEAVY_TRAFFIC

• SLOW_TRAFFIC

• QUEUING_TRAFFIC

• STATIONARY_TRAFFIC

• CLOSED

• UNKNOWN

1trafficFlow {
2  location {
3    openlr: "\013\265f\361\034J\374\001\0349\363A\006\013\001\014"
4  }
5  speed {
6    averageSpeedKmph: 23
7    travelTimeSeconds: 534
8    confidence: 99
9    trafficCondition: STATIONARY_TRAFFIC
10  }
11}

Note that this feature is also available for the flow message type TrafficFlowWithPredictionPerSection.

Relative speed

When enabled, the relative speed to the free-flowing speed is given as a ratio (e.g., 0.250 indicates a current real-time speed that is 25% of free flow speed) in field relativeSpeed in the Speed message.

1trafficFlow {
2  location {
3    openlr: "\013\265f\361\034J\374\001\0349\363A\006\013\001\014"
4  }
5  speed {
6    averageSpeedKmph: 23
7    travelTimeSeconds: 534
8    confidence: 99
9    relativeSpeed: 0.229
10  }
11}

Note that this feature is also available for the flow message type TrafficFlowWithPredictionPerSection.

Time to usual

Provides the time duration (in minutes) for the average speed (of the entire location) of a flow message to return to the usual speed (speed profile). This feature is only available for flow message types TrafficFlowWithPredictionPerSection.

1trafficFlowWithPredictionPerSection {
Show hidden lines
47  timeToUsualInMinutes: 26
48}

HOV Flow

Adds separate speed entries for lanes reserved for high-occupancy vehicles, for now only the current speed for the whole location is available.

The following example shows TrafficFlow message with two speed entries, one for the regular lanes and one for the HOV lane(s).

1trafficFlow {
2  location {
3    openlr: "\v\251\003-!\331\326\001\f!\002K\371\264\001\037"
4    lengthInMeters: 1939
5  }
6  speed {
7    averageSpeedKmph: 76
8    travelTimeSeconds: 92
9    confidence: 100
10  }
11  speed {
12    averageSpeedKmph: 90
13    travelTimeSeconds: 78
14    confidence: 100
15    speedCondition {
16      laneType: HIGH_OCCUPANCY
17    }
18  }

Note that this feature is also available for the flow message type TrafficFlowWithPredictionPerSection.

Map version

Provides name and version of the map that was used to create the content. The map version is reported with the mapVersion field in the MetaInformation message.

1metaInformation {
2  createTimeUTCSeconds: 1696833480
3  supplierAndClientInfo {
4    clientID: "5b5977db-ab96-4599-b079-314a09cb9f204045d8f9"
5    supplierID: "TomTom Traffic Service"
6  }
7  mapVersion: "nam2023.06.060"
8}
9trafficFlow {
Show hidden lines
20  }
21}

Note that this feature is also available in snapshots with the flow message type TrafficFlowWithPredictionPerSection.